Light Gauge Steel Machines
One Machine. The Whole Frame.
Send your frame file and the machine forms every stud, track and truss member at its programmed length, punched and notched to fit. US-engineered, specified and commissioned by ACERO.
Three steps to a standing frame
The frame file drives the machine. Every member comes off the line cut, punched and ready to fasten.
Detail your frames
Import your building design into the Vertex framing software included with the machine.
It forms every piece
Each stud, track and truss member is rolled, then web notches, lip cuts, service and bolt holes are punched in line.
Your crew assembles
Pieces go together on site into wall panels and roof trusses.
Coil in. Frame members out.
Roll forming, web notches, lip cuts, service and bolt holes, all in line. Watch a member go from strip to finished part.
LGS framing machines
One dedicated machine per web size, or one line that changes size automatically between profiles.
Single-profile lines
One dedicated machine per web sizeMulti-profile lines
Automatic size change between profilesNeed another web size? Sizes shown are examples. Send us your framing members and we will configure the line.
Talk to ACERO →
Ready to frame on day one
Framing software included with the machine.
Notches and holes in line, no secondary operation.
12, 14, 16 or 18 ga, set at consultation.
PLC controls your crew can run.
Chrome-plated forming rollers built for long runs.
Inspected.
Commissioned.
Ready.
ACERO configures the profile, tooling and software to the frames you build — then supervises installation and commissioning on your floor.
Talk to ACERO about your line.